Product Specifications
Raw martial:
Filter Media
MeltBlownPolypropylene
End Caps
PP
Extended Core
PP
Center tube
PP
Gaskets/O-Rings
Silicone/Buna-N/Viton/ EPDM /PE
Dimensions:
Outside Diameter2.5" (63mm)
Inside Diameter1.1" (28mm)
Lengths
4"-50" (101.6mm-1270mm)
Performance parameters:
Retention Ratings
0.5, 1, 3, 5, 10, 20, 30, 50, 75μm
Maximum Differential Pressure
50 psid (3.45 bar) @ ambient
25 psid (1.72 bar) @ 140°F (60°C)Maximum working temperature:
85℃
Recommended Change Out Differential Pressure
35 psid (2.4 bar)
Flow Rate vs. Differential Pressure:
Note:
Curve of 10"(254mm)filter traffic.
In nonaqueous fluid, use table medium voltage differential value multiplied by units of cp fluid viscosity values.Ordering information: