The Filtering Process: Raw water enters from the filter inlet and passes through the screen . Clean water flows through the filter outlet. The gradual dirt buildup on the inner screen surface causes a filter cake to develop, with a corresponding increase in the pressure differential across the screen. A pressure differential switch senses the pressure differential and when it reaches a pre-set value, the cleaning process begins. The Self-Cleaning Process: Cleaning of the filter is carried out by the suction scanner which spirals across the screen:the open exhaust valves creates a high velocity suction stream at the nozzle tip which “vacuums”the filter cake from the screen. During the self-cleaning process, which takes approximately 30 seconds, filtered water continues to flow downstream. Features: No interruption of downstream flow during flushing. Automatic flushing according to pressure differential and/or time or manual. According to the need, can provide resistance to seawater or explosion-proof type. Performance parameters: Standard filtration degrees 10~3500μm Maximum flowrate 1300 m3/h(Higher flow please consult our company) Max. working temperature 60℃(Higher temperature please consult our company) working pressure 2bar~10bar( lower / higher pressure please consult our company) Flow Rate vs. Differential Pressure
Note:
Pressure Loss at 200 Micron
The actual flow has great relationship with water quality and filtration precision,the details please contact the company.